Merge branch 'wifiwave2' into next

7 files changed, 103 insertions, 38 deletions

diff --git a/doc/accesslist-duplicates.md b/doc/accesslist-duplicates.md
index c59aebf..e3767e7 100644
--- a/doc/accesslist-duplicates.md
+++ b/doc/accesslist-duplicates.md
@@ -15,14 +15,19 @@ entries in wireless access list.
 Requirements and installation
 -----------------------------
 
-Depending on whether you use CAPsMAN (`/caps-man`) or local wireless
-interface (`/interface/wireless`) you need to install a different script.
+Depending on whether you use `wifiwave2` package (`/interface/wifiwave2`)
+or legacy wifi with CAPsMAN (`/caps-man`) or local wireless interface
+(`/interface/wireless`) you need to install a different script.
 
-For CAPsMAN:
+For `wifiwave2`:
+
+    $ScriptInstallUpdate accesslist-duplicates.wifiwave2;
+
+For legacy CAPsMAN:
 
     $ScriptInstallUpdate accesslist-duplicates.capsman;
 
-For local interface:
+For legacy local interface:
 
     $ScriptInstallUpdate accesslist-duplicates.local;
 
diff --git a/doc/capsman-download-packages.md b/doc/capsman-download-packages.md
index 58f84e8..8174c13 100644
--- a/doc/capsman-download-packages.md
+++ b/doc/capsman-download-packages.md
@@ -18,24 +18,39 @@ This script automatically downloads these packages.
 Requirements and installation
 -----------------------------
 
-Just install the script on CAPsMAN device:
+Just install the script on CAPsMAN device. Depending on whether you use
+`wifiwave2` package (`/interface/wifiwave2`) or legacy wifi with CAPsMAN
+(`/caps-man`) you need to install a different script.
 
-    $ScriptInstallUpdate capsman-download-packages;
+For `wifiwave2`:
 
-Optionally add a scheduler to run after startup:
+    $ScriptInstallUpdate capsman-download-packages.wifiwave2;
 
-    /system/scheduler/add name=capsman-download-packages on-event="/system/script/run capsman-download-packages;" start-time=startup;
+For legacy CAPsMAN:
+
+    $ScriptInstallUpdate capsman-download-packages.capsman;
+
+Optionally add a scheduler to run after startup. For `wifiwave2`:
+
+    /system/scheduler/add name=capsman-download-packages on-event="/system/script/run capsman-download-packages.wifiwave2;" start-time=startup;
+
+For legacy CAPsMAN:
+
+    /system/scheduler/add name=capsman-download-packages on-event="/system/script/run capsman-download-packages.capsman;" start-time=startup;
 
 Packages available in local storage in older version are downloaded
-unconditionally. The script tries to download missing packages by guessing
-from system log.
+unconditionally.
+
+If no packages are found the script tries to download missing packages for
+legacy CAPsMAN by guessing from system log. For `wifiwave2` a default set
+of packages (`routeros` and `wifiwave2` for *arm* and *arm64*) is downloaded.
 
 Usage and invocation
 --------------------
 
 Run the script manually:
 
-    /system/script/run capsman-download-packages;
+    /system/script/run capsman-download-packages.wifiwave2;
 
 ... or from scheduler.
 
diff --git a/doc/capsman-rolling-upgrade.md b/doc/capsman-rolling-upgrade.md
index d146adf..5c038e9 100644
--- a/doc/capsman-rolling-upgrade.md
+++ b/doc/capsman-rolling-upgrade.md
@@ -20,9 +20,17 @@ parallel.
 Requirements and installation
 -----------------------------
 
-Just install the script:
+Just install the script on CAPsMAN device. Depending on whether you use
+`wifiwave2` package (`/interface/wifiwave2`) or legacy wifi with CAPsMAN
+(`/caps-man`) you need to install a different script.
 
-    $ScriptInstallUpdate capsman-rolling-upgrade;
+For `wifiwave2`:
+
+    $ScriptInstallUpdate capsman-rolling-upgrade.wifiwave2;
+
+For legacy CAPsMAN:
+
+    $ScriptInstallUpdate capsman-rolling-upgrade.capsman;
 
 Usage and invocation
 --------------------
@@ -33,7 +41,7 @@ that script when required.
 
 Alternatively run it manually:
 
-    /system/script/run capsman-rolling-upgrade;
+    /system/script/run capsman-rolling-upgrade.wifiwave2;
 
 See also
 --------
diff --git a/doc/collect-wireless-mac.md b/doc/collect-wireless-mac.md
index dd3743f..9ba1e3a 100644
--- a/doc/collect-wireless-mac.md
+++ b/doc/collect-wireless-mac.md
@@ -22,14 +22,19 @@ and modify it to your needs.
 Requirements and installation
 -----------------------------
 
-Depending on whether you use CAPsMAN (`/caps-man`) or local wireless
-interface (`/interface/wireless`) you need to install a different script.
+Depending on whether you use `wifiwave2` package (`/interface/wifiwave2`)
+or legacy wifi with CAPsMAN (`/caps-man`) or local wireless interface
+(`/interface/wireless`) you need to install a different script.
 
-For CAPsMAN:
+For `wifiwave2`:
+
+    $ScriptInstallUpdate collect-wireless-mac.capsman.wifiwave2;
+
+For legacy CAPsMAN:
 
     $ScriptInstallUpdate collect-wireless-mac.capsman;
 
-For local interface:
+For legacy local interface:
 
     $ScriptInstallUpdate collect-wireless-mac.local;
 
diff --git a/doc/daily-psk.md b/doc/daily-psk.md
index 9a5e558..60a645f 100644
--- a/doc/daily-psk.md
+++ b/doc/daily-psk.md
@@ -21,17 +21,24 @@ Requirements and installation
 
 Just install this script.
 
-Depending on whether you use CAPsMAN (`/caps-man`) or local wireless
-interface (`/interface/wireless`) you need to install a different script
-and add schedulers to run the script:
+Depending on whether you use `wifiwave2` package (`/interface/wifiwave2`)
+or legacy wifi with CAPsMAN (`/caps-man`) or local wireless interface
+(`/interface/wireless`) you need to install a different script and add
+schedulers to run the script:
 
-For CAPsMAN:
+For `wifiwave2`:
+
+    $ScriptInstallUpdate daily-psk.wifiwave2;
+    /system/scheduler/add interval=1d name=daily-psk on-event="/system/script/run daily-psk.wifiwave2;" start-time=03:00:00;
+    /system/scheduler/add name=daily-psk@startup on-event="/system/script/run daily-psk.wifiwave2;" start-time=startup;
+
+For legacy CAPsMAN:
 
     $ScriptInstallUpdate daily-psk.capsman;
     /system/scheduler/add interval=1d name=daily-psk on-event="/system/script/run daily-psk.capsman;" start-time=03:00:00;
     /system/scheduler/add name=daily-psk@startup on-event="/system/script/run daily-psk.capsman;" start-time=startup;
 
-For local interface:
+For legacy local interface:
 
     $ScriptInstallUpdate daily-psk.local;
     /system/scheduler/add interval=1d name=daily-psk on-event="/system/script/run daily-psk.local;" start-time=03:00:00;
@@ -51,11 +58,15 @@ The configuration goes to `global-config-overlay`, these are the parameters:
 > [`global-config`](../global-config.rsc) (the one without `-overlay`) to
 > your local `global-config-overlay` and modify it to your specific needs.
 
-Then add an access list entry. For CAPsMAN:
+Then add an access list entry. For `wifiwave2`:
+
+    /interface/wifiwave2/access-list/add comment="Daily PSK" ssid-regexp="-guest\$" passphrase="ToBeChangedDaily";
+
+For legacy CAPsMAN:
 
     /caps-man/access-list/add comment="Daily PSK" ssid-regexp="-guest\$" private-passphrase="ToBeChangedDaily";
 
-For local interface:
+For legacy local interface:
 
     /interface/wireless/access-list/add comment="Daily PSK" interface=wl-daily private-pre-shared-key="ToBeChangedDaily";
 
diff --git a/doc/dhcp-lease-comment.md b/doc/dhcp-lease-comment.md
index 4add0b8..cd29641 100644
--- a/doc/dhcp-lease-comment.md
+++ b/doc/dhcp-lease-comment.md
@@ -15,14 +15,19 @@ from wireless access list.
 Requirements and installation
 -----------------------------
 
-Depending on whether you use CAPsMAN (`/caps-man`) or local wireless
-interface (`/interface/wireless`) you need to install a different script.
+Depending on whether you use `wifiwave2` package (`/interface/wifiwave2`)
+or legacy wifi with CAPsMAN (`/caps-man`) or local wireless interface
+(`/interface/wireless`) you need to install a different script.
 
-For CAPsMAN:
+For `wifiwave2`:
+
+    $ScriptInstallUpdate dhcp-lease-comment.wifiwave2;
+
+For legacy CAPsMAN:
 
     $ScriptInstallUpdate dhcp-lease-comment.capsman;
 
-For local interface:
+For legacy local interface:
 
     $ScriptInstallUpdate dhcp-lease-comment.local;
 
diff --git a/doc/hotspot-to-wpa.md b/doc/hotspot-to-wpa.md
index 2630694..4909eef 100644
--- a/doc/hotspot-to-wpa.md
+++ b/doc/hotspot-to-wpa.md
@@ -19,24 +19,35 @@ Requirements and installation
 You need a properly configured hotspot on one (open) SSID and a WP2 enabled
 SSID with suffix "`-wpa`".
 
-Then install the script:
+Then install the script. Depending on whether you use `wifiwave2` package
+(`/interface/wifiwave2`) or legacy wifi with CAPsMAN (`/caps-man`) you need
+to install a different script and set it as `on-login` script in hotspot.
 
-    $ScriptInstallUpdate hotspot-to-wpa;
+For `wifiwave2`:
 
-Configure your hotspot to use this script as `on-login` script:
+    $ScriptInstallUpdate hotspot-to-wpa.wifiwave2;
+    /ip/hotspot/user/profile/set on-login="hotspot-to-wpa.wifiwave2" [ find ];
 
-    /ip/hotspot/user/profile/set on-login=hotspot-to-wpa [ find ];
+For legacy CAPsMAN:
+
+    $ScriptInstallUpdate hotspot-to-wpa.capsman;
+    /ip/hotspot/user/profile/set on-login="hotspot-to-wpa.capsman" [ find ];
 
 ### Automatic cleanup
 
 With just `hotspot-to-wpa` installed the mac addresses will last in the
-access list forever. Install the optional script for automatic cleanup:
+access list forever. Install the optional script for automatic cleanup
+and add a scheduler.
+
+For `wifiwave2`:
 
-    $ScriptInstallUpdate hotspot-to-wpa-cleanup,lease-script;
+    $ScriptInstallUpdate hotspot-to-wpa-cleanup.wifiwave2,lease-script;
+    /system/scheduler/add interval=1d name=hotspot-to-wpa-cleanup on-event="/system/script/run hotspot-to-wpa-cleanup.wifiwave2;" start-time=startup;
 
-Create a scheduler:
+For legacy CAPsMAN:
 
-    /system/scheduler/add interval=1d name=hotspot-to-wpa-cleanup on-event="/system/script/run hotspot-to-wpa-cleanup;" start-time=startup;
+    $ScriptInstallUpdate hotspot-to-wpa-cleanup.capsman,lease-script;
+    /system/scheduler/add interval=1d name=hotspot-to-wpa-cleanup on-event="/system/script/run hotspot-to-wpa-cleanup.capsman;" start-time=startup;
 
 And add the lease script and matcher comment to your wpa interfaces' dhcp
 server. You can add more information to the comment, separated by comma. In
@@ -74,7 +85,12 @@ Additionally templates can be created to give more options for access list:
 * `vlan-id`: connect device to specific VLAN
 * `vlan-mode`: set the VLAN mode for device
 
-For a hotspot called `example` the template could look like this:
+For a hotspot called `example` the template could look like this. For
+`wifiwave2`:
+
+    /interface/wifiwave2/access-list/add comment="hotspot-to-wpa template example" disabled=yes private-passphrase="ignore" ssid-regexp="^example\$" vlan-id=10;
+
+For legacy CAPsMAN:
 
     /caps-man/access-list/add comment="hotspot-to-wpa template example" disabled=yes private-passphrase="ignore" ssid-regexp="^example\$" vlan-id=10 vlan-mode=use-tag;