From 8fc88c73f8cb99774727e7b96f9b85a8bf216c2c Mon Sep 17 00:00:00 2001 From: Christian Hesse Date: Mon, 15 Nov 2021 20:22:56 +0100 Subject: shorten modules directory name (global-functions.d -> mod) --- doc/global-functions.d/bridge-port-to.md | 79 ---------------------------- doc/global-functions.d/bridge-port-vlan.md | 83 ------------------------------ doc/mod/bridge-port-to.md | 79 ++++++++++++++++++++++++++++ doc/mod/bridge-port-vlan.md | 83 ++++++++++++++++++++++++++++++ 4 files changed, 162 insertions(+), 162 deletions(-) delete mode 100644 doc/global-functions.d/bridge-port-to.md delete mode 100644 doc/global-functions.d/bridge-port-vlan.md create mode 100644 doc/mod/bridge-port-to.md create mode 100644 doc/mod/bridge-port-vlan.md (limited to 'doc') diff --git a/doc/global-functions.d/bridge-port-to.md b/doc/global-functions.d/bridge-port-to.md deleted file mode 100644 index e0eba1e..0000000 --- a/doc/global-functions.d/bridge-port-to.md +++ /dev/null @@ -1,79 +0,0 @@ -Manage ports in bridge -====================== - -[◀ Go back to main README](../README.md) - -🛈 This module can not be used on its own but requires the base installation. -See [main README](../README.md) for details. - -Description ------------ - -This module and its functio are are supposed to handle interfaces and -switching them from one bridge to another. - -Requirements and installation ------------------------------ - -Just install the module: - - $ScriptInstallUpdate global-functions.d/bridge-port-to; - -Configuration -------------- - -The configuration goes to ports' comments (`/ interface bridge port`). - - / interface bridge port add bridge=br-guest comment="default=dhcp-client, alt=br-guest" disabled=yes interface=en1; - / interface bridge port add bridge=br-intern comment="default=br-intern, alt=br-guest" interface=en2; - / interface bridge port add bridge=br-guest comment="default=br-guest, extra=br-extra" interface=en3; - -Also dhcp client can be handled: - - / ip dhcp-client add comment="toggle with bridge port" disabled=no interface=en1; - -Add a scheduler to start with default setup on system startup: - - / system scheduler add name=bridge-port-to on-event=":global GlobalFunctionsReady; :while (\$GlobalFunctionsReady != true) do={ :delay 500ms; }; :global BridgePortTo; \$BridgePortTo default;" start-time=startup; - -Usage and invocation --------------------- - -The usage examples show what happens with the configuration from above. - -Running the function `$BridgePortTo` with parameter `default` applies all -configuration given with `default=`: - - $BridgePortTo default; - -For the three interfaces we get this configuration: - -* The special value `dhcp-client` enables the dhcp client for interface `en1`. The bridge port entry is disabled. -* Interface `en2` is put in bridge `br-intern`. -* Interface `en3` is put in bridge `br-guest`. - -Running the function `$BridgePortTo` with parameter `alt` applies all -configuration given with `alt=`: - - $BridgePortTo alt; - -* Interface `en1` is put in bridge `br-guest`, dhcp client for the interface is disabled. -* Interface `en2` is put in bridge `br-guest`. -* Interface `en3` is unchanged, stays in bridge `br-guest`. - -Running the function `$BridgePortTo` with parameter `extra` applies another -configuration: - - $BridgePortTo extra; - -* Interfaces `en1` and `en2` are unchanged. -* Interface `en3` is put in bridge `br-intern`. - -See also --------- - -* [Manage VLANs on bridge ports](bridge-port-vlan.md) - ---- -[◀ Go back to main README](../README.md) -[▲ Go back to top](#top) diff --git a/doc/global-functions.d/bridge-port-vlan.md b/doc/global-functions.d/bridge-port-vlan.md deleted file mode 100644 index 9df46b0..0000000 --- a/doc/global-functions.d/bridge-port-vlan.md +++ /dev/null @@ -1,83 +0,0 @@ -Manage VLANs on bridge ports -============================ - -[◀ Go back to main README](../../README.md) - -🛈 This module can not be used on its own but requires the base installation. -See [main README](../../README.md) for details. - -Description ------------ - -This module and its function are supposed to handle VLANs on bridge ports. - -Requirements and installation ------------------------------ - -Just install the module: - - $ScriptInstallUpdate global-functions.d/bridge-port-vlan; - -Configuration -------------- - -Using named VLANs you have to add comments in bridge vlan menu: - - / interface bridge vlan add bridge=bridge comment=intern tagged=br-local vlan-ids=10; - / interface bridge vlan add bridge=bridge comment=geust tagged=br-local vlan-ids=20; - / interface bridge vlan add bridge=bridge comment=extra tagged=br-local vlan-ids=30; - -The configuration goes to ports' comments (`/ interface bridge port`). - - / interface bridge port add bridge=bridge comment="default=dhcp-client, alt=guest" disabled=yes interface=en1; - / interface bridge port add bridge=bridge comment="default=intern, alt=guest, extra=30" interface=en2; - / interface bridge port add bridge=bridge comment="default=guest, extra=extra" interface=en3; - -Also dhcp client can be handled: - - / ip dhcp-client add comment="toggle with bridge port" disabled=no interface=en1; - -Add a scheduler to start with default setup on system startup: - - / system scheduler add name=bridge-port-vlan on-event=":global GlobalFunctionsReady; :while (\$GlobalFunctionsReady != true) do={ :delay 500ms; }; :global BridgePortVlan; \$BridgePortVlan default;" start-time=startup; - -Usage and invocation --------------------- - -The usage examples show what happens with the configuration from above. - -Running the function `$BridgePortVlan` with parameter `default` applies all -configuration given with `default=`: - - $BridgePortVlan default; - -For the three interfaces we get this configuration: - -* The special value `dhcp-client` enables the dhcp client for interface `en1`. The bridge port entry is disabled. -* Primary VLAN `intern` (ID `10`) is configured on `en2`. -* Primary VLAN `guest` (ID `20`) is configured on `en3`. - -Running the function `$BridgePortVlan` with parameter `alt` applies all -configuration given with `alt=`: - - $BridgePortVlan alt; - -* Primary VLAN `guest` (ID `20`) is configured on `en1`, dhcp client for the interface is disabled. -* Primary VLAN `guest` (ID `20`) is configured on `en2`. -* Interface `en3` is unchanged, primary VLAN `guest` (ID `20`) is unchanged. - -Running the function `$BridgePortVlan` with parameter `extra` applies another -configuration: - -* Interface `en1` is unchanged. -* Primary VLAN `extra` (via its ID `30`) is configured on `en2`. -* Primary VLAN `extra` (ID `30`) is configured on `en3`. - -See also --------- - -* [Manage ports in bridge](bridge-port-to.md) - ---- -[◀ Go back to main README](../../README.md) -[▲ Go back to top](#top) diff --git a/doc/mod/bridge-port-to.md b/doc/mod/bridge-port-to.md new file mode 100644 index 0000000..89ee5d0 --- /dev/null +++ b/doc/mod/bridge-port-to.md @@ -0,0 +1,79 @@ +Manage ports in bridge +====================== + +[◀ Go back to main README](../README.md) + +🛈 This module can not be used on its own but requires the base installation. +See [main README](../README.md) for details. + +Description +----------- + +This module and its functio are are supposed to handle interfaces and +switching them from one bridge to another. + +Requirements and installation +----------------------------- + +Just install the module: + + $ScriptInstallUpdate mod/bridge-port-to; + +Configuration +------------- + +The configuration goes to ports' comments (`/ interface bridge port`). + + / interface bridge port add bridge=br-guest comment="default=dhcp-client, alt=br-guest" disabled=yes interface=en1; + / interface bridge port add bridge=br-intern comment="default=br-intern, alt=br-guest" interface=en2; + / interface bridge port add bridge=br-guest comment="default=br-guest, extra=br-extra" interface=en3; + +Also dhcp client can be handled: + + / ip dhcp-client add comment="toggle with bridge port" disabled=no interface=en1; + +Add a scheduler to start with default setup on system startup: + + / system scheduler add name=bridge-port-to on-event=":global GlobalFunctionsReady; :while (\$GlobalFunctionsReady != true) do={ :delay 500ms; }; :global BridgePortTo; \$BridgePortTo default;" start-time=startup; + +Usage and invocation +-------------------- + +The usage examples show what happens with the configuration from above. + +Running the function `$BridgePortTo` with parameter `default` applies all +configuration given with `default=`: + + $BridgePortTo default; + +For the three interfaces we get this configuration: + +* The special value `dhcp-client` enables the dhcp client for interface `en1`. The bridge port entry is disabled. +* Interface `en2` is put in bridge `br-intern`. +* Interface `en3` is put in bridge `br-guest`. + +Running the function `$BridgePortTo` with parameter `alt` applies all +configuration given with `alt=`: + + $BridgePortTo alt; + +* Interface `en1` is put in bridge `br-guest`, dhcp client for the interface is disabled. +* Interface `en2` is put in bridge `br-guest`. +* Interface `en3` is unchanged, stays in bridge `br-guest`. + +Running the function `$BridgePortTo` with parameter `extra` applies another +configuration: + + $BridgePortTo extra; + +* Interfaces `en1` and `en2` are unchanged. +* Interface `en3` is put in bridge `br-intern`. + +See also +-------- + +* [Manage VLANs on bridge ports](bridge-port-vlan.md) + +--- +[◀ Go back to main README](../README.md) +[▲ Go back to top](#top) diff --git a/doc/mod/bridge-port-vlan.md b/doc/mod/bridge-port-vlan.md new file mode 100644 index 0000000..8b88777 --- /dev/null +++ b/doc/mod/bridge-port-vlan.md @@ -0,0 +1,83 @@ +Manage VLANs on bridge ports +============================ + +[◀ Go back to main README](../../README.md) + +🛈 This module can not be used on its own but requires the base installation. +See [main README](../../README.md) for details. + +Description +----------- + +This module and its function are supposed to handle VLANs on bridge ports. + +Requirements and installation +----------------------------- + +Just install the module: + + $ScriptInstallUpdate mod/bridge-port-vlan; + +Configuration +------------- + +Using named VLANs you have to add comments in bridge vlan menu: + + / interface bridge vlan add bridge=bridge comment=intern tagged=br-local vlan-ids=10; + / interface bridge vlan add bridge=bridge comment=geust tagged=br-local vlan-ids=20; + / interface bridge vlan add bridge=bridge comment=extra tagged=br-local vlan-ids=30; + +The configuration goes to ports' comments (`/ interface bridge port`). + + / interface bridge port add bridge=bridge comment="default=dhcp-client, alt=guest" disabled=yes interface=en1; + / interface bridge port add bridge=bridge comment="default=intern, alt=guest, extra=30" interface=en2; + / interface bridge port add bridge=bridge comment="default=guest, extra=extra" interface=en3; + +Also dhcp client can be handled: + + / ip dhcp-client add comment="toggle with bridge port" disabled=no interface=en1; + +Add a scheduler to start with default setup on system startup: + + / system scheduler add name=bridge-port-vlan on-event=":global GlobalFunctionsReady; :while (\$GlobalFunctionsReady != true) do={ :delay 500ms; }; :global BridgePortVlan; \$BridgePortVlan default;" start-time=startup; + +Usage and invocation +-------------------- + +The usage examples show what happens with the configuration from above. + +Running the function `$BridgePortVlan` with parameter `default` applies all +configuration given with `default=`: + + $BridgePortVlan default; + +For the three interfaces we get this configuration: + +* The special value `dhcp-client` enables the dhcp client for interface `en1`. The bridge port entry is disabled. +* Primary VLAN `intern` (ID `10`) is configured on `en2`. +* Primary VLAN `guest` (ID `20`) is configured on `en3`. + +Running the function `$BridgePortVlan` with parameter `alt` applies all +configuration given with `alt=`: + + $BridgePortVlan alt; + +* Primary VLAN `guest` (ID `20`) is configured on `en1`, dhcp client for the interface is disabled. +* Primary VLAN `guest` (ID `20`) is configured on `en2`. +* Interface `en3` is unchanged, primary VLAN `guest` (ID `20`) is unchanged. + +Running the function `$BridgePortVlan` with parameter `extra` applies another +configuration: + +* Interface `en1` is unchanged. +* Primary VLAN `extra` (via its ID `30`) is configured on `en2`. +* Primary VLAN `extra` (ID `30`) is configured on `en3`. + +See also +-------- + +* [Manage ports in bridge](bridge-port-to.md) + +--- +[◀ Go back to main README](../../README.md) +[▲ Go back to top](#top) -- cgit v1.2.3-70-g09d2